Customer need
Maintenance and survey work require a measurement method and range suitable for the gas encountered.
NOVEL · Product and System Solutions
Gas Detectors and Industrial Measurement Instruments

From need to solution
New Cosmos X-2000 Series: selection starts with the measurement or system output your team needs for its decision.
Maintenance and survey work require a measurement method and range suitable for the gas encountered.
Readings and alarm indications from the fitted sensors help assess conditions at the inspection point.
Plan screening, closer investigation and repeat measurements, with pre-use checks and site procedures as part of the measurement process.
| Detected Gas | Oxygen (O2) |
|---|---|
| Sensor Type | Galvanic Sensor |
| Measurement Method | Diffusion |
| Detected Gas Range | 0-25 %vol |
| Alarm Values | 1st Stage: 19.5 %vol 2nd Stage: 18.0 %vol |
| Battery Specifications and Life | 1 x AAA Alkaline Battery, 5000 hours battery life |
| Weight | ~75g (Including Battery) |
| Detected Gas | Carbon monoxide (CO) |
|---|---|
| Sensor Type | Electrochemical Sensor |
| Measurement Method | Diffusion |
| Detected Gas Range | 0-300ppm |
| Alarm Values | 1st Stage: 50ppm 2nd Stage: 150ppm TWA: 150ppm·h |
| Battery Specifications and Life | 1 x AAA Alkaline Battery, 5000 hours battery life |
| Weight | ~75g (Including Battery) |
| Detected Gas | Hydrogen sulphide (H2S) |
|---|---|
| Sensor Type | Electrochemical Sensor |
| Measurement Method | Diffusion |
| Detected Gas Range | 0-30ppm |
| Alarm Values | 1st Stage: 10ppm 2nd Stage: 15ppm |
| Battery Specifications and Life | 1 x AAA Alkaline Battery, 5000 hours battery life |
| Weight | ~75g (Including Battery) |
| Detected Gas | Oxygen (O2) Carbon monoxide (CO) |
|---|---|
| Sensor Type | Oxygen (O2): Galvanic Sensor For Carbon Monoxide (CO): Electrochemical Sensor |
| Measurement Method | Diffusion |
| Detected Gas Range | Oxygen (O2): 0-25 %vol For Carbon Monoxide (CO): 0-300ppm |
| Alarm Values | Oxygen (O2): 1st Stage: 19.5 %vol 2nd Stage: 18.0 %vol For Carbon Monoxide (CO): 1st Stage: 50ppm 2nd Stage: 150ppm TWA: 150ppm·h |
| Battery Specifications and Life | 1 x AAA Alkaline Battery, 5000 hours battery life |
| Weight | ~75g (Including Battery) |
| Detected Gas | Oxygen (O2) Hydrogen sulphide (H2S) |
|---|---|
| Sensor Type | Oxygen (O2): Galvanic Sensor Hydrogen sulphide (H2For S): Electrochemical Sensor |
| Measurement Method | Diffusion |
| Detected Gas Range | Oxygen (O2): 0-25 %vol Hydrogen sulphide (H2For S): 0-30ppm |
| Alarm Values | Oxygen (O2): 1st Stage: 19.5 %vol 2nd Stage: 18.0 %vol Hydrogen sulphide (H2For S): 1st Stage: 10ppm 2nd Stage: 15ppm |
| Battery Specifications and Life | 1 x AAA Alkaline Battery, 5000 hours battery life |
| Weight | ~75g (Including Battery) |
Monitoring and Control of Oxygen, Carbon Monoxide, Hydrogen Sulphide Gases for Field Personnel Safety
Clip-on, Lightweight and Practical Design
Single or Dual Sensor Options
Audible, Visual, Vibrating Alarm
5000 hours and more operation with replaceable AAA battery
You can examine product details and technical specifications by selecting an alternative suited to your requirements.
Describe the measurement or communication task, operating environment, required range or capacity and recording needs. NOVEL can help review the model and configuration information on this page.
Review the specifications, documents and any accessories sections on this page. Include model, quantity and intended use in your quotation request, and confirm compatibility before ordering.
NOVEL technical support
A draft opens in your email client with the subject header of the relevant product or category.