NOVEL · Product and System Solutions

Q-TRAK XP Model 7585

Occupational Safety and Environmental Measuring Instruments

Q-TRAK XP Model 7585

Indoor Air Quality Monitor

The Q-Trak™ XP Model 7585 Indoor Air Quality Monitor is an exceptional air quality monitor engineered using the most advanced technology, user-friendly, easily portable, and capable of performing gas and particulate measurements alongside full traditional IAQ measurements. Combining IAQ and occupational hygiene measurement parameters, this intelligent instrument can be equipped with various gas sensors to allow you to easily perform your indoor air quality evaluations.

Request a Quote from NOVEL ↗

From need to solution

Turn an air-quality complaint into measurement evidence

Q-TRAK XP Model 7585: selection starts with the measurement or system output your team needs for its decision.

01

Customer need

Indoor investigations need information about changes associated with ventilation, occupancy and potential sources.

02

Product output

Parameters measured by the fitted sensors or probes are reviewed with their measurement location and time.

03

Decision supported

Plan ventilation adjustments, follow-up investigation and monitoring points; a single parameter or spot reading does not describe every aspect of air quality or health risk.



Measurement and Standards Approach

Parameters to be measured in indoor air quality assessment should be selected based on intended use, building type, and source of complaint. Indoor building parameter standards such as EN 16798-1 should be evaluated alongside relevant national legislation and project criteria. Instrument data must not be interpreted on their own as a health diagnosis or regulatory compliance verdict.

Product Specifications

  • Instantaneous Measurement of All Indoor Air Quality Parameters Measures up to 20 different parameters simultaneously. Performs PM1, PM2.5, PM10 dust measurements and total particle counting.

  • Large LCD Screen for Ease of Use - Effortless Portability Thanks to Lightweight Build The instrument is equipped with a much larger touchscreen compared to its equivalents. Thanks to this large screen, managing the device and following measurement data is straightforward. Being considerably lighter than its counterparts, it can be carried comfortably by hand without causing operator fatigue.

  • Building - Facility Emission Measurements (Green Building, LEED, USGBC, WELL measurements) One of the most critical objectives in indoor air quality measurements is to reduce and eliminate carbon output in buildings and facilities. Energy efficiency is achieved by taking real-time measurements of parameters—primarily CO2—in buildings and identifying and resolving problem sources. Another aim of these measurement studies is to diagnose what is termed "sick building syndrome". With data obtained from measurements conducted for this purpose, parameters negatively affecting individual comfort and quality of life in working and living spaces can be identified, and corrective actions taken to resolve these issues.

  • Thermal Comfort Measurements (with Temperature and Relative Humidity data) Thermal conditions in people's living and working areas can be measured, issues identified if present, and resolved. The hardware required for this measurement is integrated into the instrument.

  • Outstanding Design Capable of Measuring Up to 6 Gases Equipped with pre-calibrated "Plug&Play" optional gas sensors, the instrument presents real-time gas levels to the user based on ambient conditions and enables report generation.

  • Extensive Connectivity and Software Options With its extensive built-in connectivity options, the instrument can connect to PCs and other hardware to transfer measurement data. Conducting all measurements with a single instrument is highly practical and cost-effective.

Accessories and Consumables

Accessories, consumables and replacement parts listed by the manufacturer. This is not a standard package-content list. Please specify the instrument model and part number; compatibility and supply are confirmed for your configuration.

Multi-Sensor IAQ Module 801430

801430

Multi-Sensor IAQ Module 801430

Q-Trak XP 7585; confirm sensor/module compatibility

IAQ module for compatible measurement-channel configurations.

Q-Trak XP Battery Cover with Tripod Mount and Tabletop Tripod 800129

800129

Q-Trak XP Battery Cover with Tripod Mount and Tabletop Tripod 800129

Q-Trak XP 7585; confirm sensor/module compatibility

Battery cover with tripod mount and tabletop tripod.

Wi-Fi Dongle 800124

800124

Wi-Fi Dongle 800124

Q-Trak XP 7585; confirm sensor/module compatibility

Connectivity depends on regional approval and supported software.

Show more accessories (6)

801407

VOC Sensor, ppm (high) 801407

Q-Trak XP 7585; confirm sensor/module compatibility

High-range ppm TVOC sensor; select for the application.

Sectors

Alternative Products

You can examine product details and technical specifications by selecting an alternative suited to your requirements.

Frequently Asked Questions

What information is needed to select Q-TRAK XP Model 7585?

Describe the measurement or communication task, operating environment, required range or capacity and recording needs. NOVEL can help review the model and configuration information on this page.

Where can I find accessories and technical documents?

Review the specifications, documents and any accessories sections on this page. Include model, quantity and intended use in your quotation request, and confirm compatibility before ordering.

NOVEL technical support

For your application,
let us select the right solution together.

Request a Quote from NOVEL ↗

A draft opens in your email client with the subject header of the relevant product or category.