New Cosmos PS-7
Uses a sensor cartridge selected for one target gas. Full scale depends on the gas and cartridge; see the product table for 23 gas options.
Product Details →NOVEL · PRODUCTS AND SYSTEM SOLUTIONS
Find Gas Detectors by Target Gas
Find products for methane, ammonia, carbon monoxide, carbon dioxide, oxygen and specialty gases by gas name or chemical formula.
Gas packages and sensor options depend on the model. This finder covers the active products technically mapped below; contact NOVEL for the wider portfolio. Acoustic FlexSonic is excluded from this concentration finder because it does not measure gas concentration.
Heath HYBRID Service
Optical multi-gas measurement. Check each gas range and operating mode in the product specifications.
Product Details →Technical Sources
Heath HYBRID CGI
Optical multi-gas measurement. Check each gas range and operating mode in the product specifications.
Product Details →Technical Sources
Heath RMLD-CS
Methane-selective remote laser survey. The ppm·m reading is path-integrated and is not the same as point concentration in ppm.
Product Details →Technical Sources
TGES LaserMethane Smart
Remote laser survey for methane; path-integrated measurement in ppm·m.
Product Details →Technical Sources
New Cosmos XA-4000II
Gas package depends on the model. The combustible channel is selected for methane or isobutane calibration; not every model includes every gas.
Product Details →Technical Sources
New Cosmos XP-3380II
Pumped oxygen measurement; the target gas is oxygen.
Product Details →Technical Sources
New Cosmos KS-7R
Fixed monitoring and alarm for carbon dioxide.
Product Details →Technical Sources
SENKO iGas Detector CO₂
Personal diffusion NDIR CO₂ monitoring; 0–5 %vol. Does not measure CO or O₂.
Product Details →Technical Sources
New Cosmos XPS-7 / XPS-7II
Portable specialty/semiconductor gas family with target-specific sensors. Confirm cartridge compatibility and ranges separately for XPS-7 and XPS-7II.
Product Details →Technical Sources
New Cosmos XP-3310II / XP-3340II / XP-3360II / XP-3360II-W
Select the target combustible gas and calibration when ordering. XP-3310II: 0–100 %LEL; XP-3360II: 0–5000 or 0–10000 ppm; XP-3360II-W: 0–100 %LEL with ppm display; XP-3340II: 0–100 %vol. Gas and range depend on the model.
Product Details →Technical Sources
New Cosmos KD-12
KD-12R: methane/propane/CO₂; KD-12D: CO or H₂S; KD-12O: O₂; KD-12C: H₂ options. Select gas and range when ordering; this is not simultaneous multi-gas measurement. CO: 0–100/150/250 ppm; H₂S: 0–30/50 ppm; O₂: 0–25 vol%.
Product Details →Technical Sources
New Cosmos KS-7
KS-7D: CO; KS-7O: O₂; KS-7R: CO₂. These are separate model/sensor options; confirm the selected gas and range.
Product Details →Technical Sources
CETCI LPT
Single-sensor analog series. Example configurations: CO 0–100/200 ppm; NO₂ 0–10 ppm; NH₃ 0–500 ppm; Cl₂ 0–5 ppm; O₂ 0–25 vol%; H₂S 0–50 ppm. Confirm the current ordering configuration for SO₂.
Product Details →Technical Sources
CETCI cGAS
Select the gas, digital/analog model and sensor code within the cGAS family. Examples: cGAS-D-7NH₃ 0–500 ppm; cGAS-D-7H₂S 0–50 ppm; cGAS-D-7HCl/HCN 0–30 ppm. Indoor, refrigerant and combustible gas configurations differ; not all gases are included in one detector.
Product Details →Technical Sources
Manufacturer source 1 ↗ Manufacturer source 2 ↗ Manufacturer source 3 ↗
New Cosmos PD-12
Pumped fixed series. The manufacturer defines target gas and range to the order specification. Search by model; no individual gas filter is assigned without a verified configuration.
Product Details →Technical Sources
PERGAM SELMA MPB2 Vehicle Laser Methane Detector
SELMA MPB2 is a vehicle-mounted laser methane measurement system designed for bumper installation during mobile gas leak inspections. Utilizing a dedicated suction pump, it draws ambient air samples to measure methane (CH4) concentrations through optical laser absorption. According to manufacturer specifications, the unit delivers a high sensitivity of 0.03 ppm with a rapid measurement cycle of 0.04 seconds. Operating on a 12 V power supply, it is specified for mobile survey operations at vehicle driving speeds of up to 50 km/h.
PERGAM SELMA Duo Methane and Ethane Leak Survey System
SELMA Duo (Sniffer) is an extractive TDLS analyzer designed for both pedestrian walking surveys and vehicle-based mobile gas leak inspections. It measures methane (0–40,000 ppm) and ethane (0–1,000 ppm) with a 0.01 ppm display resolution. Notably distinct from resolution, the lowest detection limit is <=0.30 ppm for CH4 (<=0.15 ppm with 10-second averaging) and <=15 ppm for ethane (<=10 ppm with 10-second averaging). Field operations are supported via an Android smartphone app, Bluetooth data sync, and GPS route tracking.
PERGAM LMA Remote Laser Ammonia Leak Detector
LMA is a portable handheld TDLAS detector for remote ammonia leak investigation. It reports NH₃ integrated along the laser path in ppm·m. Its lightweight body, short response time and rechargeable battery support field inspections.
PERGAM LMS Stationary Laser Methane Scanner
The LMS family comprises fixed laser scanners for continuous methane leak monitoring at gas facilities. A programmed route supports remote surveillance of critical equipment and pipework. Measurement and alarm events are evaluated within the site monitoring strategy.
No match found. Check the gas name or formula and contact NOVEL for other sensor options.
For acoustic detection of pressurised leaks: Det-Tronics FlexSonic →